Our Aquarium RO Systems meet stringent standards
and far exceeds the quality of systems from other
manufacturers. A wide variety of options ranging
from economy 3-stage units to top of the line
5-stage RO/DI units are available to suit your
exact needs.
Deionization (DI) filters
De-mineralize filter takes the full size RO to a
higher level of filtration. It is an excellent
selection for reef enthusiasts and other serious
aquarists, especially those who live in areas with
exceptionally high levels of phosphates in their
tap water. Our unit includes: sediment
pre-filters, carbon pre-filters and TFC (Thin Film
Composite) membrane, Deionization (DI)
post-filters in clear housings. The post deionizer
takes the small percentage of contaminants that
the membrane could not remove and filters this to
greater than 99.99% pure. It will give you 0 ppm
TDS, Conductivity attainable less than 0.1uS/cm or
resistivity of close to 18 meg.ohm
Build-in
Pressure Gauge
The minimum operating pressure for a RO (reverse
osmosis) unit is 50 psi (pounds per square inch).
This unit build-in pressure gauge to monitor the
operating pressure of the system. If the operating
pressure is too low, an RO pressure boosting pump
can be added to increase the operating pressure to
the ideal range.
Why do I need RO water ?
Tap water often contains impurities that can cause
problems when added to an aquarium. These include
phosphate, nitrate, chlorine, and various heavy
metals. High levels of phosphate and nitrate fuel
aggressive algae growth, and copper, often present
in tap water due to leaching from pipes, is highly
toxic to invertebrates. Because RO filters remove
practically all of these impurities, they are
becoming more popular among aquarists,
particularly marine hobbyists.
(please click
here
for more information)
--------------------------------------------------------------------------------
Features:
Reverse Osmosis
Technologies
Easy to Use and Store
Three Color Coded Tubing For System Connection.
Include Common Faucet Adaptor For Easy
Installation.
100% Factory Tested and Sterilized.
Include Installation Instruction.
Deionization (DI) Filter.
Pressure Gauge
Booster Pump For Low Pressure Needs (Optional)
80GPD, 100GPD, 200GPD Membrane (Optional)
--------------------------------------------------------------------------------
FS301-DI cartridge filters
(Stage 1) 5 Micron Sediment Filter :
With only five micron rating. It is effective in
removing dirt, rust and sand particles.
(Stage 2) Granular Activated Carbon Filter:
It takes out 99% of the chlorine and organic
chemicals. It provides enhanced reduction of
taste, odor, and color. Protect and prolong the
life of membrane.
(Stage 3) Reverse Osmosis Membrane:
A thin film composite (TFC) high quality membrane
that processes 50 gallons per day. It remove the
following hard water contaminants that may be
present in your water: lead, cooper, barium,
chromium, mercury, sodium, cadmium, fluoride,
nitrite, nitrate, and selenium.
(Stage 4) Deionization (DI) Filter:
Produce 99.99% pure water by simply attaching this
convenient deionization filter with RO unit.
Convenient post RO filtration DI unit (RO/DI unit)
provides crucial supplemental filtration to remove
most impurities for pure polished product water.
Excellent in areas with hard water. Produce 99.99%
pure water. It will give you 0 ppm TDS,
Conductivity attainable less than 0.1uS/cm or
resistivity of close to 18 meg.ohm
--------------------------------------------------------------------------------
Specifications:
Production: 50 GPD / 189 LPD
Minimum Operation pressure: 50 psi
Dimensions: (cm)28 (L) x 35 (H) x 15 (W) - system
Weight: 4.8 kg - system
Frequently
Asked Question
