Water at it's best
This system hides away under your sink and puts
healthy great-tasting water at your fingertips.
Our RO102 comes complete with a NSF certified 3.2
gallons water storage tank, NSF approved post
carbon filter and all the necessary fittings,
installation kits, extra color 1/4" tubing, and a
ceramic-gate attractive faucet. We don't know any
other system at our price that can approaches its
performance.
Features:
NSF Standards Water Storage Tank.
FDA Approved Polypropylene Made Flat Cap Housing
(double o'ring).
Safety approval: TUV (EN60950) & CE MARK
Automatic Shut-off Valve
Special technical designs (Patented No.068018.
flush membrane )
Flow Restrictor, Stainless Steel Check Valve.
European design attractive faucet.
Feed water connector & deliver valve
Drain Saddle Valve.
Four Color Coded 1/4 inch Tubing for System
Connection
Completely Assembled & Water leaking testing
100% Factory Tested and Sterilized Ready for
Installation.
Installation Instruction.
RO102 - cartridge filters
(Stage 1) 5 Micron Sediment Filter :
With only five micron rating. It is effective in
removing dirt, rust and sand particles.
(Stage 2) Granular Activated Carbon Filter:
It takes out 99% of the chlorine and organic
chemicals. It provides enhanced reduction of
taste, odor, and color.
(Stage 3) 1 Micron Sediment Filter :
With only 1 micron rating, provides effective
filtration to protect your membrane. It provides
for improved membrane performance up to 95% of TDS
rejection.
(Stage 4) Reverse Osmosis Membrane:
A thin film composite (TFC) high quality membrane
that processes 80 gallons per day. It remove the
following hard water contaminants that may be
present in your water: lead, cooper, barium,
chromium, mercury, sodium, cadmium, fluoride,
nitrite, nitrate, and selenium.
(Stage 5) Post Carbon filter:
This carbon post filter removes objectionable
tastes and odors to enhance the quality of your
drinking water. We are using NSF approved post
carbon to guarantee the taste of water.
--------------------------------------------------------------------------------
Specifications:
Membrane: 80 GPD / 302 LPD
With a transformer, available in 110Volt, 220Volt
or 240Volt (50/60Hz).
Safety approval: TUV (EN60950) & CE MARK
Operation pressure: 5 -80 psi
Dimensions: (cm)47 (L) x 42(H) x 20 (W) - system
(cm) 28 (L) x 28(W) x 35 (H)- tank
Weight: 12 kg - system
4 kg - tank
