Auto flushing the membrane to get the best RO
performance.
It is the world most modern technologies for RO
system. It was usually been installed in the
industry RO unit only. But now we are the first
one to install it in our residential RO units.
Benefits
Built-in the self-cleaning procedure, so the
membrane remains clean. Water never stands still
for a longer time to avoid bacteria growing. Let
all of your customers can enjoy the best water
quality.
5 Indicators : shows how it works
Full, Flush, Process, Source, Power. Easy to
control the RO system and help your customer to
understand the RO system. Smart to warn the user
if the operation is affected for any reason.
Features:
NSF Standards Water Storage Tank.
FDA Approved Polypropylene Made Flat Cap Housing
(double o'ring).
Safety approval: TUV (EN60950) & CE MARK
Automatic Shut-off Valve
Special technical designs (Patented No.068018.
flush membrane )
Flow Restrictor, Stainless Steel Check Valve.
European design attractive faucet.
Feed water connector & deliver valve
Drain Saddle Valve.
Four Color Coded 1/4 inch Tubing for System
Connection
Completely Assembled & Water leaking testing
100% Factory Tested and Sterilized Ready for
Installation.
Installation Instruction.
RO103 - cartridge filters
(Stage 1) 5 Micron Sediment Filter :
With only five micron rating. It is effective in
removing dirt, rust and sand particles.
(Stage 2) Granular Activated Carbon Filter:
It takes out 99% of the chlorine and organic
chemicals. It provides enhanced reduction of
taste, odor, and color.
(Stage 3) Block Carbon Filter :
Further reduces chlorine, odors, and other
chemicals that might be in your water supply.
(Stage 4) Reverse Osmosis Membrane:
A thin film composite (TFC) high quality membrane
that processes 80 gallons per day. It remove the
following hard water contaminants that may be
present in your water: lead, cooper, barium,
chromium, mercury, sodium, cadmium, fluoride,
nitrite, nitrate, and selenium.
(Stage 5) Post Carbon filter:
This carbon post filter removes objectionable
tastes and odors to enhance the quality of your
drinking water. We are using NSF approved post
carbon to guarantee the taste of water.
--------------------------------------------------------------------------------
Specifications:
Membrane: 80 GPD / 302 LPD
With a transformer, available in 110Volt, 220Volt
or 240Volt (50/60Hz).
Safety approval: TUV (EN60950) & CE MARK
Operation pressure: 5 -80 psi
Dimensions: (cm)47 (L) x 42(H) x 20 (W) - system
(cm) 28 (L) x 28(W) x 35 (H)- tank
Weight: 14 kg - system
4 kg - tank
